Effect of Mg and Cu on mechanical properties of high-strength welded joints of aluminum alloys obtained by laser welding
- Autores: Annin B.1, Fomin V.2, Karpov E.1, Malikov A.2, Orishich A.2
-
Afiliações:
- Lavrent’ev Institute of Hydrodynamics, Siberian Branch
- Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
- Edição: Volume 58, Nº 5 (2017)
- Páginas: 939-946
- Seção: Article
- URL: https://journals.rcsi.science/0021-8944/article/view/160422
- DOI: https://doi.org/10.1134/S0021894417050212
- ID: 160422
Citar
Resumo
Results of experimental investigations of welded joints of high-strength aluminum–lithium alloys of the Al–Cu–Li and Al–Mg–Li systems are reported. The welded joints are obtained by means of laser welding and are subjected to various types of processing for obtaining high-strength welded joints. A microstructural analysis is performed. The phase composition and mechanical properties of the welded joints before and after heat treatment are studied. It is found that combined heat treatment of the welded joint (annealing, quenching, and artificial ageing) increases the joint strength, but appreciably decreases the alloy strength outside the region thermally affected by the welding process.
Palavras-chave
Sobre autores
B. Annin
Lavrent’ev Institute of Hydrodynamics, Siberian Branch
Autor responsável pela correspondência
Email: annin@hydro.nsc.ru
Rússia, Novosibirsk, 630090
V. Fomin
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
Email: annin@hydro.nsc.ru
Rússia, Novosibirsk, 630090
E. Karpov
Lavrent’ev Institute of Hydrodynamics, Siberian Branch
Email: annin@hydro.nsc.ru
Rússia, Novosibirsk, 630090
A. Malikov
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
Email: annin@hydro.nsc.ru
Rússia, Novosibirsk, 630090
A. Orishich
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
Email: annin@hydro.nsc.ru
Rússia, Novosibirsk, 630090