Creep and Stress Relaxation in the Case of Loading and Unloading of a Cylindrical Layer with Allowance for the Development and Deceleration of a Viscoplastic Flow
- Авторлар: Begun A.1, Kovtanyuk L.1, Lemza A.2
-
Мекемелер:
- Institute of Automation and Control Processes, Far Eastern Branch
- Far Eastern Federal University
- Шығарылым: Том 60, № 4 (2019)
- Беттер: 748-757
- Бөлім: Article
- URL: https://journals.rcsi.science/0021-8944/article/view/161619
- DOI: https://doi.org/10.1134/S0021894419040205
- ID: 161619
Дәйексөз келтіру
Аннотация
The theory of large deformations is used to solve the problem of deformation of an elastoviscoplastic material placed in a gap between two coaxial cylindrical surfaces, with one of them rotating with an alternating rate and the other one at rest. It is shown that an increase in the stresses in a cylindrical layer due to a mechanical influence on it initially causes irreversible creep strains because of viscosity of the material and then the accumulation of plastic strains because of the arrival of stress states at the loading surface. The unloading is accompanied by a plastic strain and then a viscous one. The stress-strain parameters of the medium with a varying rotation rate of the cylinder are calculated. Stress relaxation after the complete stop of a cylinder is described.
Негізгі сөздер
Авторлар туралы
A. Begun
Institute of Automation and Control Processes, Far Eastern Branch
Email: lk@iacp.dvo.ru
Ресей, Vladivostok, 690041
L. Kovtanyuk
Institute of Automation and Control Processes, Far Eastern Branch
Хат алмасуға жауапты Автор.
Email: lk@iacp.dvo.ru
Ресей, Vladivostok, 690041
A. Lemza
Far Eastern Federal University
Email: lk@iacp.dvo.ru
Ресей, Vladivostok, 690091