Effect of Ozone Processing on the Wettability of Filament Fiber Spunbond Polypropylene Nonwoven Fabric


Цитировать

Полный текст

Открытый доступ Открытый доступ
Доступ закрыт Доступ предоставлен
Доступ закрыт Только для подписчиков

Аннотация

The effect of ozone on the wettability of filament fiber spunbond polypropylene nonwoven fabric was studied by the contact angle method. The contact angles of wetting with water decreased from 127 to 115 ° after pressed samples of spunbond material were treated for 240 min with ozone at a concentration of 25 g/m3. The result can be explained by an increase in the number of polar C–O groups in the surface layer of the ozone-treated fibers, as determined by X-ray photoelectron spectroscopy.

Об авторах

T. Sharova

State Scientific Center of the Russian Federation JSC “Scientific Research Physicochemical Institute named after L. Ya. Karpov”

Автор, ответственный за переписку.
Email: tsytata@gmail.com
Россия, Moscow

A. Obvintsev

State Scientific Center of the Russian Federation JSC “Scientific Research Physicochemical Institute named after L. Ya. Karpov”

Email: tsytata@gmail.com
Россия, Moscow

Дополнительные файлы

Доп. файлы
Действие
1. JATS XML

© Springer Science+Business Media, LLC, 2017

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).