Influence of Test Parameters on the Corrosive Effect of Jet Fuels on Nonferrous Metals Under Dynamic Conditions


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

Experimental data are obtained to show the influence of parameters of jet fuel testing in a TsITO-M unit on the corrosive effect of the fuels on copper and VB-23NTs bronze. It is shown that corrosiveness of fuels increases under dynamic conditions. Reduced fuel flow rate reduces the corrosive effect of the fuel on nonferrous metals. Presence of nonferrous metals reduces thermo-oxidative stability of the fuel threefold. It is indicated that the corrosion loss of copper is highest at 150 °C. Elevation of fuel temperature from 130 to 170°C reduces the corrosive effect of the fuel on VB-23NTs bronze.

作者简介

N. Likhterova

Federal Autonomous Establishment “The 25th State Research Institute of chemmotology of the Ministry of Defence of the Russian Federation,”

Email: alyamurashkina@gmail.com
俄罗斯联邦, Moscow

K. Shatalov

Federal Autonomous Establishment “The 25th State Research Institute of chemmotology of the Ministry of Defence of the Russian Federation,”

编辑信件的主要联系方式.
Email: alyamurashkina@gmail.com
俄罗斯联邦, Moscow

V. Suzikov

Federal Autonomous Establishment “The 25th State Research Institute of chemmotology of the Ministry of Defence of the Russian Federation,”

Email: alyamurashkina@gmail.com
俄罗斯联邦, Moscow

I. Nikitin

Federal Autonomous Establishment “The 25th State Research Institute of chemmotology of the Ministry of Defence of the Russian Federation,”

Email: alyamurashkina@gmail.com
俄罗斯联邦, Moscow


版权所有 © Springer Science+Business Media New York, 2016
##common.cookie##