Analysis and Optimization of Basic Geometric Parameters of Annular Slot Seal Made in the Form of Hydrodiode
- 作者: Kondyurin A.1, Shcherba V.1, Shalai V.1, Noskov A.2, Khait A.2
-
隶属关系:
- Omsk State Technical University
- Ural Federal University
- 期: 卷 52, 编号 3-4 (2016)
- 页面: 280-289
- 栏目: Article
- URL: https://journals.rcsi.science/0009-2355/article/view/234726
- DOI: https://doi.org/10.1007/s10556-016-0187-4
- ID: 234726
如何引用文章
详细
This article is the second stage of the research on annular slot hydrodiode. Computational experiments were conducted to establish the correlation between the response functions of the hydrodiode and a number of geometric and hydraulic factors. The results are presented in the form of regression equations, which are used to optimize the geometry of the hydrodiode flow section with a view to minimizing the ratio of the rates of liquid flow through the hydrodiode in forward and reverse directions. The physical phenomena accompanying the hydrodiode operation are analyzed in detail.
作者简介
A. Kondyurin
Omsk State Technical University
Email: himnef@mospolytech.ru
俄罗斯联邦, Omsk
V. Shcherba
Omsk State Technical University
Email: himnef@mospolytech.ru
俄罗斯联邦, Omsk
V. Shalai
Omsk State Technical University
Email: himnef@mospolytech.ru
俄罗斯联邦, Omsk
A. Noskov
Ural Federal University
Email: himnef@mospolytech.ru
俄罗斯联邦, Ekaterinburg
A. Khait
Ural Federal University
Email: himnef@mospolytech.ru
俄罗斯联邦, Ekaterinburg