Use of Ion Beam Modification and Gas-Thermal Oxidation in the Process of Formation of Structurally Heterogeneous Oxide Coatings for Titanium Medical Implants

I. V. Rodionov; I. V. Perinskaya; L. E. Kuts; V. V. Perinskii; I. S. Egorov; A. A. Fomin

doi:10.1007/s10527-018-9736-9

Use of Ion Beam Modification and Gas-Thermal Oxidation in the Process of Formation of Structurally Heterogeneous Oxide Coatings for Titanium Medical Implants

Autores: Rodionov I.V.¹, Perinskaya I.V.¹, Kuts L.E.¹, Perinskii V.V.¹, Egorov I.S.¹, Fomin A.A.¹
Afiliações:
1. Yuri Gagarin State Technical University of Saratov
Edição: Volume 51, Nº 5 (2018)
Páginas: 303-307
Seção: Theory and Design
URL: https://journals.rcsi.science/0006-3398/article/view/235226
DOI: https://doi.org/10.1007/s10527-018-9736-9
ID: 235226

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

A new promising method for preliminary ion beam processing of titanium implants has been suggested and tested. The method uses high-energy Не⁺ ion implantation to achieve a high level of open porosity needed to form thin-layered coatings by the method of gas-thermal oxidation in air. The mechanism of pore formation and the effect of the obtained structurally heterogeneous oxide coatings on the osteointegration of rod implants are described.