Effects of Arm Prosthesis Socket Design on Pressure Distribution on the Inner Surface of the Socket
- Авторы: Zamilatskii Y.I.1, Kurdibaylo S.F.1, Gainullina R.R.1
-
Учреждения:
- St. Petersburg G. A. Albrecht Scientific and Practical Center for Medical and Social Expertise, Prosthetics and Rehabilitation, Ministry of Labor and Social Protection of the Russian Federation
- Выпуск: Том 50, № 5 (2017)
- Страницы: 305-309
- Раздел: Article
- URL: https://journals.rcsi.science/0006-3398/article/view/234714
- DOI: https://doi.org/10.1007/s10527-017-9643-5
- ID: 234714
Цитировать
Аннотация
Biomechanical studies of the distribution of specific pressure across the internal surface of the socket were performed, focusing on the end of the arm stump during manipulation of the prosthesis. This was undertaken using a matrix of tensometric multisensory probes. These studies showed that peak loadings at local zones decreased significantly with increases in the area and continuity of contact of the skin of the stump with the internal surface of the socket. The best results were obtained using combined sockets made from silicone.
Об авторах
Yu. Zamilatskii
St. Petersburg G. A. Albrecht Scientific and Practical Center for Medical and Social Expertise, Prosthetics and Rehabilitation, Ministry of Labor and Social Protection of the Russian Federation
Автор, ответственный за переписку.
Email: reabin@center-albreht.ru
Россия, St. Petersburg
S. Kurdibaylo
St. Petersburg G. A. Albrecht Scientific and Practical Center for Medical and Social Expertise, Prosthetics and Rehabilitation, Ministry of Labor and Social Protection of the Russian Federation
Email: reabin@center-albreht.ru
Россия, St. Petersburg
R. Gainullina
St. Petersburg G. A. Albrecht Scientific and Practical Center for Medical and Social Expertise, Prosthetics and Rehabilitation, Ministry of Labor and Social Protection of the Russian Federation
Email: reabin@center-albreht.ru
Россия, St. Petersburg
Дополнительные файлы
