Correction of the Output Parameters of an Electrosurgical Unit for Minimizing Thermal Damage to Tissues
- Autores: Belik D.V.1,2, Kustov I.N.1,2, Belik K.D.1, Shekalov A.V.1
-
Afiliações:
- Siberian Research and Testing Center for Biomedical Engineering
- Scientific Research Institute of Biomedical Engineering, Novosibirsk State Technical University
- Edição: Volume 51, Nº 4 (2017)
- Páginas: 258-261
- Seção: Article
- URL: https://journals.rcsi.science/0006-3398/article/view/235153
- DOI: https://doi.org/10.1007/s10527-017-9726-3
- ID: 235153
Citar
Resumo
A method for diminishing electrosurgery-induced thermal damage to biological tissues by correcting the power output is considered. The output power is corrected according to the type of biological tissue and the impedance increment caused by coagulation. The results of a study of biological tissue impedance substantiating the feasibility of this method are presented.
Sobre autores
D. Belik
Siberian Research and Testing Center for Biomedical Engineering; Scientific Research Institute of Biomedical Engineering, Novosibirsk State Technical University
Autor responsável pela correspondência
Email: dvbelik@mail.ru
Rússia, Novosibirsk; Novosibirsk
I. Kustov
Siberian Research and Testing Center for Biomedical Engineering; Scientific Research Institute of Biomedical Engineering, Novosibirsk State Technical University
Email: dvbelik@mail.ru
Rússia, Novosibirsk; Novosibirsk
K. Belik
Siberian Research and Testing Center for Biomedical Engineering
Email: dvbelik@mail.ru
Rússia, Novosibirsk
A. Shekalov
Siberian Research and Testing Center for Biomedical Engineering
Email: dvbelik@mail.ru
Rússia, Novosibirsk
Arquivos suplementares
